Created by Unknown User (munnerly), last modified on Nov 04, 2019
No labels
1 Comment
Unknown User (munnerly)
25Aug2019
RF09
Munnerlyn
Preflight
dsm305 (nose) red on status page, no data in Aeros, responds to ping, does not allow ssh login. No change in behavior from yesterday (maint). All of us concur that CPU card is the likely culprit. Dave is changing it and the A2D card (different issue, offsets from yesterday). Now cannot even ping the CPU. Decision made with PI to fly anyway.
A2D cards show no signs of channel shifting.
VXCEL has intensity over 1000 but no DP_VXL, cycle power. Still does not come back.
MIRROR_DPx has data but no DPx, could be DPx uses values from nose dsm for calculation.
12:37Z Wheels up, position not updating on map. Had Carol and Dave find Catherine
13:11Z DP_VXL nan, intensity over 1100, cycle power to VCSEL. (After later refering to manual, I beleive that output depends on ATX, which is not available today because dsm305 is down.)
13:15Z LRINT_VXL has been gradually decreasing to about 500
13:16Z Down camera not producing new files, cycle stop/start
15:12Z In cloud. CDP shows concentrations. Only RWO 2DC has images and shows concentrations. LWO conc are 0 and no images shown, end diode voltages are still within range so I think the concentrations are just outside the LWO 2DC range.
15:44Z DPR stuck at -35C, DPL is about-67C, cycle power DPR to get rebalance cycle.
16:42Z Chris Webster had me stop and restart Nimbus
16:42Z DP_VXL is back, must just depend on TASX, not ATX
17:23Z In cloud again, CDP and 2DC on right wing shoe concentrations, 2DC on Left wing does not show concentrations.
1 Comment
Unknown User (munnerly)
25Aug2019
RF09
Munnerlyn
Preflight
dsm305 (nose) red on status page, no data in Aeros, responds to ping, does not allow ssh login. No change in behavior from yesterday (maint). All of us concur that CPU card is the likely culprit. Dave is changing it and the A2D card (different issue, offsets from yesterday). Now cannot even ping the CPU. Decision made with PI to fly anyway.
A2D cards show no signs of channel shifting.
VXCEL has intensity over 1000 but no DP_VXL, cycle power. Still does not come back.
MIRROR_DPx has data but no DPx, could be DPx uses values from nose dsm for calculation.
12:37Z Wheels up, position not updating on map. Had Carol and Dave find Catherine
13:11Z DP_VXL nan, intensity over 1100, cycle power to VCSEL. (After later refering to manual, I beleive that output depends on ATX, which is not available today because dsm305 is down.)
13:15Z LRINT_VXL has been gradually decreasing to about 500
13:16Z Down camera not producing new files, cycle stop/start
15:12Z In cloud. CDP shows concentrations. Only RWO 2DC has images and shows concentrations. LWO conc are 0 and no images shown, end diode voltages are still within range so I think the concentrations are just outside the LWO 2DC range.
15:44Z DPR stuck at -35C, DPL is about-67C, cycle power DPR to get rebalance cycle.
16:42Z Chris Webster had me stop and restart Nimbus
16:42Z DP_VXL is back, must just depend on TASX, not ATX
17:23Z In cloud again, CDP and 2DC on right wing shoe concentrations, 2DC on Left wing does not show concentrations.