Skip to end of metadata
Go to start of metadata

Noticed that some Ifans were 0:

tse13.80m: wouldn't respond to control-R, but came back up with a power cycle (pio)

tse13.2m: responds to control-R, but immediately fan is 0.  I tried increasing the current limit to 200mA, and still is immediately 0.  I suspect this is the VERTEX fan-monitoring-board-dead issue.

tse06.60m: responds to control-R, but immediately fan is 0.  I tried increasing the current limit to 200mA, and still is immediately 0.  I suspect this is the VERTEX fan-monitoring-board-dead issue.

tse09.100m: wouldn't respond to control-R, but came back up with a power cycle (pio)

 

  • No labels