Andy INTERCOMPARISON SYSTEM FIELD NOTES, 
     --------- Thursday, September 02, 2004 -------
       (CU and HYDRA Times in watch time MST, USGS Time in Datalogger time, AIRCOA A and AIRCOA B time is Prometheus time )
		USGS Datalogger time = 9:36:30 when Watch time = 10:36:38
               Tank Pressures with Valves
             Cylinder    Closed     Open
             --------    -------    -----	
             A FA02374   1450		1450 
             B FA02361   1220		1300
             C FA02340   1140		1410

AIRCOA A Willow site
14:51:10 	Take control using palmtop
14:52:20	Valves 11 and 12 on (fast-flow and guest cal)
14:53:05	V12 off
14:54:24	Noticed V1 and V3 were on so turned off
14:55:00	CO2 = 369.1 - 369.7
14:56:40	Step 3-way to B and valve 12 on, P = 79.785, Flow = 1.620, CO2 = 307.5
14:57:27	V12 off, P = 71.871, Flow = 1.620, CO2 = 303.7
15:00:05	Step 3-way to C and valve 12 on.P = 79.84, Flow = 2.98, CO2 = 333.9
15:01:19	V12 off. P = 71.885, Flow = 1.618, CO2 = 330.8 - 332.0
15:03:39	"r" to return control
		Cal cylinders:  HS2 = 1670 psig, HS1 = 930, LS1 = 1730, LS2 = 1840

HYDRA at Pine Tower
9:36 MDT	Connect to 3-way valve with quick connect 
		On line S5. Sample Ball Flow = 37. Pump Pressure = 8.9 psi.
9:37:40		Switch to gas A. 
9:38:10		Done adjusting regulator to get Flow = 37, Pressure = 8.9 psi.	
		CO2 = 60.40 - 60.44 um/m. H2O = -0.785 um/m. LiCor P = 70.82 kPa
9:40:45		Step 3-way to B. 
9:41:00		Adjusted regulator to get Flow = 36.5, Pressure = 8.8 psi.
9:42:30		CO2 = 16.32 - 16.37 um/m. H2O = -0.814 um/m. LiCor P = 70.81 kPa
9:43:45		Step 3-way to C. 
9:44:15		Adjusted regulator to Flow = 36.5, Pressure = 8.8 psi.
9:45:30		CO2 = 35.05 - 35.13 um/m. H2O = -0.840 um/m. LiCor P = 70.81 kPa
9:47:15		3-way back to HYDRA, System on D-S3


CU Tower
10:14:16 MDT	On level L2. CO2 = 1.317 Switched profile to manual. Toggled C2.
10:14:55	P = 20.8 psig. 	
10:16:30	3-way to ICS, Cylinder A
10:17:30	Adjust regulator to get 21 psig. 
10:18:30	Vco2 = 1.293
10:19:30	Step 4-way to B
10:20:00	Regulator adjusted to get 21.0 psig. 
10:21:00	Vco2 = 1.129 
10:22:00	Step 4-way to C
10:22:30	Regulator adjusted to get 21.0 psig. 
10:23:30	Vco2 = 1.200
10:24:30	Toggled C2. CO2 = 1.258
10:27:00	Back to Auto, sampling L2
10:27:15	Switch to L3, CO2 = 1.296


USGS Tower

9:36:30 MST	Sampling line 11, P = 547.63
9:38:30		Switched 3-way to start ICS, Cylinder A
9:40:30		Adjusted regulator to get 546.6. CO2 reading is 393.3 - 393.5.
9:42:30		Step 3-way to B.
9:43:00		Done adjusting regulator to get 546.6. CO2 = 325.91-326.02
9:46:00		Step 3-way to C.
9:46:30		Done adjusting regulator to get 552.28, CO2 = 354.55 - 354.67, H2O = -1.136.
9:49:00		Switched 3-way back to sample from towers, line disconnected.
		System on line 7 

AIRCOA B Aspen site
11:19:45 MDT 	Rebooted unit
11:21:30 MDT = 17:21:22 UTC
17:21:22	Connect palmtop. Sampling air, Line 0, slow flow. P = 71.471, CO2 = 346.3 - 343.8
		After switching to High flow, P = 77.788
17:24:00	Took control. Open V11, V12. Adjust regulator to 10. 
17:24:53	Switch to A 
17:25:00	P good @ 77.815 
17:26:15	V12 turned off.
17:27:30	Tried switching valves on and off repeatedly to get bit 19 to toggle. Toggled it manually.
		Then remembered that Gordon's new program uses bit 20, which we don't see
		P = 71.51, CO2 = 392.7 - 393.15
17:29:30	Switch to gas B, V12 on 
17:30:30	Close V12
17:30:50	Open V12, adjust P to 73.22
17:32:00	Close V12, P = 71.296, CO2 = 321.5 - 322.3
17:33:00	P = 71.296, CO2 = 321.5 - 322.3
17:34:34	Switch to C, V12 on
17:35:28	V12 off
17:36:15	P = 71.404, CO2 = 350.7 - 352.3
17:38:02	Return unit control to Prometheus
		HS2 = 1610, HS1 = 1840, LS1 = 1760, LS2 = 1720