#
setenv SCRATCH .
#
#   Use one of these versions of Reorder:
#
#setenv qreod /h/eol/tammy/bin/reorder/qreod
#setenv qreod /h/eol/dennisf/Development/Reorder/original138/bin/qreod
#setenv qreod /h/eol/ljmill/Reorder/original138/bin/qreod
setenv qreod /h/eol/ljmill/Reorder/trunk/bin/qreod
#
#   Execute Reorder ($qreod) on SPOL Dorade sweep files
#
$qreod << reo.inp > reorder_t.log
DIRECTORY:"/scr/sci/ljmill/STEPS/SPOL/Swp";
OUTPUT:2330-SPOL_T;
INSTRUMENT:SPOL;
;
^Origin is set to the lat/lon of KGLD (Goodland WSR-88D);
^Grid will be in MSL when GALTITUDE:0.0 for the origin;
;
RLONGITUDE:-102.0935;  
RLATITUDE:39.76114;  
RALTITUDE:1.103;
GLONGITUDE:-101.7003; 
GLATITUDE:39.3669; 
GALTITUDE:0.000;
;
WEIGHTING FUNCTION: CRESSMAN;   ^THE DEFAULT;
^WEIGHTING FUNCTION: EXPONENTIAL,-1.0;
^WEIGHTING FUNCTION: UNIFORM;
^WEIGHTING FUNCTION: CLOSEST;
;
XMIN:-50.0;   XMAX:120.0;   XSPACING:1.0;
YMIN:-70.0;   YMAX:90.0;    YSPACING:1.0;
ZMIN:0.0;     ZMAX:10.0;    ZSPACING:0.5;    
^SPRINT_XYZ;
ADJUST_Z;
;
^ Specify the type of box dimensions.;
^    Cartesian - XYZ radii (fixed with range);
^    Spherical - RAE radii (varies with range);
^    Hybrid - maxima of XYZ and RAE radii (varies with range);
;
^BOX DIMENSIONS: CARTESIAN (XYZ);
BOX DIMENSIONS: SPHERICAL (RAE);
^BOX DIMENSIONS: HYBRID (BOTH);
;
^ Specify radii of influence for both Cartesian (XYZ);
^ (XRADIUS=0.0 ==> dx=dy);
;
XRADIUS:1.2;
YRADIUS:1.2;
ZRADIUS:0.5;
;
^ and Spherical (RAE) space (rgradius=0.0 ==> dx=dy);
;
rgradius: 0.0;
azradius: 0.7;
elradius: 1.0;
;
^MNEMONIC:Input,Output;
;        
^ Interpolate received power and polarimetric quantities (6) = okay;
^ DBZFIELD ==> dB --> linear --> interpolate --> dB;
;
DBZFIELD:DZ,DZ;
DBZFIELD:DM,DM;
DBZFIELD:DL,DL;
DBZFIELD:DX,DX;
DBZFIELD:ZD,ZDR;
DBZFIELD:LD,LDR;
;
^ FIELD ==> Interpolate as is, no conversion (9);
^           including NO dB --> linear conversions
;
^FIELD:DM,DM_L;
^FIELD:DZ,DZ_L;
^FIELD:DL,DL_L;
^FIELD:DX,DX_L;
^FIELD:ZD,ZDR_L;
^FIELD:LD,LDR_L;
FIELD:NC,NCP;
FIELD:PH,PHI;
FIELD:KD,KDP;
;
^ Interpolate velocity-related quantities (3);
;
FIELD:VE,VE;
UNFOLD:VE,VE_UF;
FIELD:SW,SW;
;
^ Interpolate special fields (5);
;
FIELD:XX,VRANDOM; 
FIELD:RG,RG;
FIELD:AZ,AZ;
FIELD:EL,EL;
FIELD:TI,TIME;
;
^ Special quality control fields;
^
^ The following fields are useful for assessing the reorder interpolation,;
^ especially how different vertical radii (ZRADIUS or elradius) affect;
^ interpolated fields.;
;
^ Interpolate some velocity data quality parameters (11);
;
COUNT:VE,CNT;
OCTANT:VE,OCT;
QUALITY:VE,QUAL;
KFIELD:VE,KFAC;
WFACTOR:VE,WFAC;
SDEVIATION:VE,SDEV;
AVERAGE:VE,VE_AVG;
VREFERENCE:VE,VE_REF;
;
^ Apparently Reorder never calculates these fields, at least correctly;
;
^RADIUS:VE,RADIUS;
^MINBIGR:VE,MNBIGR;
^MAXBIGR:VE,MXBIGR;
;
EXPERIMENT:STEPS;
START:29-JUN-100,23:30:38;
STOP:29-JUN-100,23:34:33;
QUIT;
;
reo.inp
/bin/rm reo-*