Initial AHATS data system configuration.
The data systems get their address from the aster base via DHCP.
name | viper# | box | IP | tower | net link |
...
profile | 3 | 6 | 192.168.14.103 | profile | eantg |
downwind1 | 6 | 14 | 192.168.14.106 | d4 | hub in profile |
downwind2 | 1 | 13 | 192.168.14.101 | d10 | eanth |
upwind | 2 | 1 | 192.168.14.102 | u7 | hub in downwind2 |
pressure1 | 10 | small | 192.168.14.110 | d4 | hub in profile |
pressure2 | 11 | large | 192.168.14.111 | d10 | hub in downwind2 |
To prevent the AP24 from serving addresses to the vipers, I entered these commands:
| Code Block |
|---|
ip dhcp-server lease
add mac-address 00:80:66:10:43:96 block-access=yes
add mac-address 00:80:66:10:43:8C block-access=yes
add mac-address 00:80:66:10:43:92 block-access=yes
add mac-address 00:80:66:10:43:8D block-access=yes
add mac-address 00:80:66:10:43:C5 block-access=yes
add mac-address 00:80:66:10:42:A6 block-access=yes
add mac-address 00:80:66:10:43:96 block-access=yes
|