Normally we do not use data at wind directions of +/- 45 degrees from 180 (in sonic coordinates). For , in order to eliminate winds blowing through the tower and into the back of the sonic. However, because of the topography at RIM, I used data at +/- 120 degrees. Also at RIM, I find more believable 60 about the nominal axis of the gap, SSW or 202.5 deg. The tilt plots are done with respect to the sonic u axis, which was pointed to 253 degrees. Thus in instrument coordinates, the acceptable data is from -10 deg to 110 deg.
Also at RIM, there is a systematic descent of air into the crater, i.e. a vertical flow normal to the "surface". I find more realistic lean angles by setting w.off = 0. Used and use the latter results in the RIM cal_files.
Can recalculate these at end of project.
sonic | lean (deg) | leanaz (deg) | w offset (cm/s) | ||||||
---|---|---|---|---|---|---|---|---|---|
3m.near | 0.6 1 | -3.5 2 | -1 2 | ||||||
10m.near | 1.0 | 11 9.5 9 | -2 | ||||||
15m.near | 0.6 5 | 47 43.9 2 | 0 | ||||||
20m.near | 0.7 6 | 32 27.3 8 | -1 | ||||||
25m.near | 1.1 0 | 77 79.9 1 | -1 | ||||||
30m.near | 0.7 | 32 38.3 1 | -1 2 | ||||||
35m.near | 0.9 7 | 114 112.5 2 | -2 | ||||||
40m.near | 0.8 6 | 89 96.3 2 | 1 0 | ||||||
45m.near | 1.2 1 | 47 33.8 7 | -1 | ||||||
50m.near | 1 0.0 8 | 37 34.4 0 | 0 | ||||||
5m.rim | 1.5 3 | -140.5 | -7 |
| 1.4 | -97.7 91.2 | 0 | ||
10m.rim 3.0 | 153.3 | -14 |
| 2.2 | -122.2 7 | 0 | |||
15m.rim | 2 1.8 7 | -163.9 | -21 |
| 1107.5 -116.9 | 0 | |||
20m.rim | 2.9 | -168 | -24 |
| 1.2 4 | -127109.4 7 | 0 | ||
25m.rim | 3.3 | 178.6 | -29 | 1.1 | -119.2 |
| 1.0 | -164.7 | 0 |
30m.rim | 3.5 | -179.1 | -29 |
| 1.3 4 | -161126.8 2 | 0 | ||
35m.rim | 3 1.0 2 | -177.5 | -32 | 101.4 | 0.8 | ||||
-135.5 | 0 | 40m.rim | 3.6 | -156.5 | -31 |
| 2.1 4 | -115110.3 8 | 0 |
3m.far | 1.0 1 | -31.6 8 | -1 2 | ||||||
3m.flr | 0.5 7 | 167 162.6 1 | -3 | ||||||
3m ssw2.ssw2 flr | 10.2 1 | -59.1 0 | 3 2 | ||||||
3m ssw4.ssw4 flr | 30.6 5 | -3938.4 2 | -4 5 |