...
Borrowed 100 ft white cat 5 cable in server seatainer for the run from the network switch in the seatainer up the tower.
Installed etherant on turbulence tower, 192.168.12.35.
Viper CPU in ADAM has address 192.168.12.167.
Set up ssh port forwarding so that Viper is addressable from 192.168.100 net without a routing table entry.
Installed a Patton Model 570 ethernet surge protector in the seatainer. I believe it was installed
between the write white cable coming from the tower and the AP24 power " injector". The other possibility is
that it was installed between the AP24 power injector and the network switch. It was grounded
to a cover plate screw on the wall power strip.a power outlet.
Installed etherant on turbulence tower, 192.168.12.35. It is connected to the eth1 port on the front of the adam.
Installed a 4 port linksys switch in the adam.
Viper CPU in ADAM has address 192.168.12.167.
Set up ssh port forwarding so that Viper is addressable from 192.168.100 net without a routing table entry.
Installed a Patton 570 surge protector inside the adam Also installed a Patton 570 inside the data system box at the flux tower, grounded to the chassis,
between the inside RJ45 connector of the ethernet port on the interface panel and the 4 port switch in the box.