Initial AHATS data system configuration. Note: this was changed later, see changed serial cards at upwind, downwind2
name | viper# | box | IP | tower | net link | serial #0 | serial #1 |
profile | 3 | 6 | 192.168.14.103 | profile | eantg | 8P W274095 | 8M 240017 |
downwind1 | 6 | 14 | 192.168.14.106 | d4 | hub in profile | 8M W249918 | 8M 250043 |
downwind2 | 1 | 13 | 192.168.14.101 | d10 | eanth | 8P W274177 | 8M W249924 |
upwind | 2 | 1 | 192.168.14.102 | u7 | hub in downwind2 | 8P W274198 | 8M W240025 |
pressure1 | 10 | small | 192.168.14.110 | d4 | hub in profile |
|
|
pressure2 | 11 | large | 192.168.14.111 | d10 | hub in downwind2 |
|
|
To prevent the AP24 from serving addresses to the vipers, I entered these commands:
Code Block |
---|
ip dhcp-server lease add mac-address 00:80:66:10:43:96 block-access=yes add mac-address 00:80:66:10:43:8C block-access=yes add mac-address 00:80:66:10:43:92 block-access=yes add mac-address 00:80:66:10:43:8D block-access=yes add mac-address 00:80:66:10:43:C5 block-access=yes add mac-address 00:80:66:10:42:A6 block-access=yes add mac-address 00:80:66:10:43:96 block-access=yes |