...
~13:30 We're off to Moro Bay for some R&R&R...
| Wiki Markup |
|---|
I sometimes get the following error when trying "aup", but a second "aup" always works: |
Starting adam code.../usr/local/isff/scripts/adam/start_adam: line 30: 11238 Illegal instruction dsm '$ISFF/projects/$PROJECT/ISFF/config/'$CONFIG_XM |
L |
. |
\[Gordon says that this is an artifact of moving code from Viper RAM to SD card. If second |
"aup" works, live with it.\] |
8/12:
0945 - unpinched tubing to P.bedard
0950 - turned "profile" adam off to swap serial card
1005 - turned "profile" back on – - don't have 8M card (rather than 8P)
1020-1030 - moved bedard port from on stake near ground to 13b boom (back a bit
from sonic)
1106 - added "adnaup" crontab on profile to restart every hour at 15 min after the hour.
~1130-1230:
...
1150-1210: replaced CSAT 720 with 733 at profile.8m (since high? speeds). (733 was the original
"low" sonic at 8m when I arrived here, I think...) 6-4-09 (twh) Found a corresponding break in the 8m sonic data on 8/11, not 8/12
1210-1215: decided that it wasn't worth moving TRH's by 2cm in height. (7m wouldn't fit 2cm lower
anyway.)
1215: secured profile adam box