Jul 17, 2009
Installed AP24, 802.11 access point on walkup tower, just above the 11th section. Ethernet IP: 192.168.100.202, Wireless IP: 192.168.12.251.
Borrowed 100 ft white cat 5 cable in server seatainer for the run from the switch in the seatainer up the tower.
Installed etherant on turbulence tower, 192.168.12.35.
Viper CPU in ADAM has address 192.168.12.167.
Set up ssh port forwarding so that Viper is addressable from 192.168.100 net without a routing table entry.
Installed a Patton Model 570 ethernet surge protector in the seatainer. I believe it was installed
between the write cable coming from the tower and the AP24 power "injector". The other possibility is
that it was installed between the AP24 power injector and the network switch. It was grounded
to a cover plate screw on the wall power strip.
Also installed a Patton 570 inside the data system box at the flux tower, grounded to the chassis,
between the ethernet port on the interface panel and the 4 port switch in the box.