During setup it was found that the markers for the 449 antenna panel clamps were off, except for one section. Using the measurements from this section we were able to correctly figure out the placements for the clamps. Once the panels and clamps were installed the colored tape indicators were replaced. Below is a diagram showing where the clamps should be placed as well and the geometry of the 449 frame. Starting from the yellow corner (A) and going clockwise the clamps should be placed at approx. 3'10 1/2" from each intersection.
For SWEX the 449 Profiler is orientated such that the E-field points towards the red corner which is in the direction of the ISS trailer, pictured below. Johns simulations of the profiler helped in determining the best placement.
| CH 0 | Red | Panel 0 | Front End #0 |
|---|---|---|---|
| CH 1 | Yellow | Panel 6 | Front End #4 |
| CH 2 | Green | Panel 4 | Front End #6 |
