RF09
April 2, 2024
Tech: Aaron Gunlock
Pre-Flight:
No satcom
started research power up ~0630
DSM 323 error on start up, cycled power on the unit and cleared the error
APU Start 0730
Engine Start 0745
Taxi 0755
Take Off 0801
Cameras didn't initial the first try using the desktop icon, stopped the process and used a terminal command on the next try and they came up
0815 Satcom is still down, had the FE cycle the breaker in the cockpit
0824 temp for the HVPS was tracking low, cycled the breaker
1014-1018 lost VXCEL while descending through clouds, the rest of flight VXCEL would drop for 5-10 seconds while moving through any significant clouds
~1300 the CVI temps started climbing towards upper bounds, had the FE turn down the cabin heat
1602 landed and started shutdown
1 Comment
Aaron Gunlock
RF09
April 2, 2024
Tech: Aaron Gunlock
Pre-Flight:
No satcom
started research power up ~0630
DSM 323 error on start up, cycled power on the unit and cleared the error
APU Start 0730
Engine Start 0745
Taxi 0755
Take Off 0801
Cameras didn't initial the first try using the desktop icon, stopped the process and used a terminal command on the next try and they came up
0815 Satcom is still down, had the FE cycle the breaker in the cockpit
0824 temp for the HVPS was tracking low, cycled the breaker
1014-1018 lost VXCEL while descending through clouds, the rest of flight VXCEL would drop for 5-10 seconds while moving through any significant clouds
~1300 the CVI temps started climbing towards upper bounds, had the FE turn down the cabin heat
1602 landed and started shutdown