As sensors and DSMs need attention during the project, or other tasks are needed, they can be added to the "dynamic task list" below. Enter the task description in the text box, then click Add. Click the arrow next to a task to see and edit more details about it.

Tasks can also be inserted anywhere in the wiki and assigned to someone. When editing a blog or wiki page, click the Insert menu and select Task List. Then after typing the task description next to the checkbox, add the \@ symbol and select a user, including yourself. Then that task will show up in that person's task list. The task report below lists all incomplete tasks collected from the ISFS Perdigao wiki space, whether inserted in the dynamic task list on this page or any other pages in the space. So this is the place to manage tasks for the whole project, including those which have not already been assigned to someone.

You can assign tasks to yourself or other accounts, and you can give tasks higher or lower priority. You can view the tasks assigned just to you by clicking your profile account in the upper right and selecting Tasks. That page lists all your tasks across all wikis, not just the Perdigao wiki.

If tasks become complicated or start to involve important technical documentation, consider creating a wiki page or JIRA issue just for that problem.

||Completed||Priority||Locked||CreatedDate||CompletedDate||Assignee||Name||
|F|M|F|1494608249088|          |granger|tse04: 60m TRH out, pio doesn't work|
|F|M|F|1489506020290|          |oncley|tnw09: Qsoil reads negative, but is okay? suggest reseating sensor cable (see https://wiki.ucar.edu/display/perdigao/2017/04/12/tnw09+Qsoil)|
|F|M|F|1494534334053|          |oncley|rne03: Main DC power cable is badly corroded at DSM (though still working apparently).  Need to re-terminate this connector.|
|F|M|F|1494370033485|          |oncley|v06/v07: fix li7500s needed to be power cycled|
|T|M|F|1495061931982|1497448000974|granger|tse05: reorient solar panel?  (now pointing east) *added second solar panel*|
|F|M|F|1494279713130|          |oncley|shoot booms on towers built since mid April.  (Waiting for Robert to bring their Multistation from DTU.)|
|F|M|F|1494279506402|          |oncley|take soil samples everywhere when wet; then when dry|
|F|M|F|1494279459539|          |oncley|clean all radiometers, though not urgent since we're having ongoing rain|
|F|M|F|1495092744547|          |oncley|rsw01: install ARL LiCor w/20m METEK when it arrives|
|F|M|F|1495092838873|          |oncley|rsw07: install ARL LiCor w/20m CSAT3A when it arrives|
|T|M|F|1494352751834|1496265124724|granger|rne04: check tower tension; install the 1 sonic *both done, then sonic blew fuses, someone fixed it and moved it to port 3, working now*|
|T|M|F|1494884046395|1496264943402|granger|rne07: 20m CSAT3A has been bad, working now *seems to be working for a while now, forgettaboutit*|
|T|M|F|1495792398607|1495814046787|granger|tse06: 2m TRH on port 0 not working (https://wiki.ucar.edu/display/perdigao/2017/05/21/Sensor+issues+21+May+AM), replace 1A fuse *fuse replaced by INEGI, TRH working*|
|T|M|F|1494353177073|1495038242139|oncley|tse05: install reduced tower, since Samortecnica won't (need to design!)|
|T|M|F|1495043790399|1495128915462|oncley|tse07: 10m CSAT has been bad, working now; TP01 out (mote fuse had cold solder joint)|
|T|M|F|1495092911806|1495120501453|oncley|tse10: install ARL LiCor w/20m METEK when it arrives [DELETED: ONLY 2 AVAILABLE FROM ARL]|
|T|M|F|1494607029848|1495038246662|oncley|tnw07: 60m TRH out, no response to pio|
|T|M|F|1489502302159|1491575934338|granger|rsw06: DSM not pinging, but wifi is: *up since 2017-04-02*|
|T|M|F|1491747204952|1491830875645|granger|Change tnw05t IP address to 192.168.1.206 *done*|
|T|M|F|1486337255920|1491832401239|granger|Add /etc/hosts to all DSMs *installs when each dsm is updated*|
|T|M|F|1494609712099|1495038264799|oncley|rsw03: 40m TRH dead, pio doesn't work|
|T|M|F|1489502324189|1491832615388|granger|rsw07: not pinging at all *up since 2017-03-30*|
|T|M|F|1486334437654|1491832869173|granger|v07: add anti-rotation plate to 2m sonic *done*; Replace 12V power supply with 14V *done*; Dead now, though has worked *v07t and v07b up since 2017-03-23*|
|T|M|F|1487355278559|1491833408722|granger|rne01: DSM sometimes isn't pinging, but wifi is -- reseat RJ45 cable? (did connect enough to scrub USB)  *up since 2017-03-30*|
|T|M|F|1485251784490|1491834049249|granger|Get remaining serial numbers (tnw07, rsw03, rne03)|
|T|M|F|1485902946449|1492007119114|granger|tse02: install solar power system; ground EC100s *done, site installed on 20170406*|
|T|M|F|1485902634437|1492084026509|granger|rne07: Check that NR01 and 20m EC150 ports are correct (I've tried swapping, but both are mostly dead) *Dan swapped cables back to match config, both work now*|
|T|M|F|1491834044072|1492084547299|granger|v07: LICOR on v07t not reporting on port 3, even after 3A fuse replaced (see https://wiki.ucar.edu/display/perdigao/2017/04/11/v07+licor for a suggestion) *fixed 20170412 by switching jumpers to RS232*|
|T|M|F|1485902704417|1492161135028|granger|tnw11: Replace 12V power supply with 14V *done 2017-04-12, but tnw11.10m sonic still bad, see new todo*|
|T|M|F|1485251745040|1492196032472|granger|rsw02: Replace 12V power supply with 14V *done 2017-04-14*|
|T|M|F|1489165196053|1492196558962|granger|rsw03: 20m Ifan=329!!, leaving off until repaired *swapped 2017-04-14*|
|T|M|F|1485903951229|1492238263507|kknudson|v04: move soil sensors?/longer sensor cable; installed longer cable 4/14|
|T|M|F|1489178988820|1492376541481|kknudson|rsw04: 20m licor: check that RTS/DTS is connected (appropriately); Rsw.in has Rsw.out moteID (replaced 2017-05-08); no wetness -- wisard board missing?|
|T|M|F|1494704649478|1494782950442|oncley|tnw02: Mount RMY; switch usb1&2 cables.|
|T|M|F|1494352714535|1494704594357|oncley|tnw02: check tower tension; install sensors; rewire power for 12V (now 24V) NOTE EACH BATTERY'S TERMINALS! (remember screws)|
|T|M|F|1494352695745|1494782946878|oncley|tnw04: check tower tension; install sensors; rewire power for 12V (now 24V) NOTE EACH BATTERY'S TERMINALS!|
|T|M|F|1487354646813|1492673002955|kknudson|tnw07: 10m TRH Ifan=0|
|T|M|F|1492537061370|1492673005021|kknudson|tnw07b: switch 12m RMY to a port with a different UART|
|T|M|F|1492537035488|1492673022239|kknudson|tnw05: Install 2m & 10 m trh, switch 12m RMY to a port with a different UART, change config so 2m and 12m sonics are swapped|
|T|M|F|1492161192105|1492672995723|kknudson|tnw11.10m sonic still reporting all bad values (error flag 12) even after voltage bumped up to 13.7V|
|T|M|F|1487354206501|1492673073816|kknudson|tse06: 2m, 10m, 20m, 60m TRH Ifan=0|
|T|M|F|1489173419064|1493304157559|dbuonome|tse07: 20m IRGA reporting bad pressure.  Either config issue or bad connector. 10m CSAT upside down?? (junction box should be on top of boom)|
|T|M|F|1490656787707|1492767217125|dbuonome|tse09: 20m TRH ifan=0|
|T|M|F|1487354369942|1493013718698|kknudson|tse11: 10m, 20m, 40m TRH Ifan=0; mote not reporting|
|T|M|F|1485812980714|1493013727786|kknudson|tse13: 70m: reattach mote cable, then power up with pio; 2m, Ifan=0; 100m TRH Ifan=0|
|T|M|F|1494353212914|1494783011071|oncley|tse14: WON'T BE ERECTED waiting for tower to be erected; prepped and ready|
|T|M|F|1494353220264|1494783024519|oncley|tse15: waiting for tower to be erected; prepped and ready|
|T|M|F|1491748472537|1493070477269|granger|rsw02: Offline though nanobeam is working, see *[Visit RSW02 and RSW05\|https://wiki.ucar.edu/display/perdigao/2017/04/08/Visit+RSW02+and+RSW05]* and *[ISFS-149\|https://jira.eol.ucar.edu/browse/ISFS-149]*  *rsw02 has been up 8 days as of 20170424*|
|T|M|F|1494609526773|1494783057576|oncley|rsw02: 20m sonic dead, pio doesn't work (port 2 died in lightning, moved to port 3, also switched sonic anyway)|
|T|M|F|1492196649234|1492766848621|dbuonome|rsw03: 10m TRH not reporting, 40m TRH requires installation|
|T|M|F|1487355287364|1493070788267|granger|rsw05: METEK on ttyS5 not reporting *working now with port switched to 422 mode*|
|T|M|F|1493804359433|1494534387487|oncley|rsw06: Replace TRH.20m. Will not come back to life with PIO.|
|T|M|F|1491833761809|1493280709888|dbuonome|rne01: kzrad on port 6 and csat3a irga on port 2 not reporting|
|T|M|F|1485251755946|1492238583608|kknudson|rne02: Replace12V power supply with 14V.|
|T|M|F|1495092790444|1495120505940|oncley|rne03: install ARL LiCor w/10m CSAT3A when it arrives  [DELETED: ONLY 2 AVAILABLE FROM ARL]|
|T|M|F|1491839177813|1493304163273|dbuonome|v07: 20m CSAT3A sonic on 4 now reporting mostly zeros with no message terminators (working at 00Z 12 Apr)|
|T|M|F|1491838698707|1493304175147|dbuonome|v06: 20m sonic reporting intermittent nans|
|T|M|F|1493070918989|1493641618220|oncley|rsw02: 20m RMYoung reporting bad diagnostic flags|
|T|M|F|1493567084907|1493649672889|oncley|rne01: Rad Mote keeps resetting, replace mote|
|T|M|F|1493639757749|1493805090467|semmer|v01: change EC150 from 10 to 20sps|
|T|M|F|1494607067662|1494783152189|oncley|v07t won't power on (also needs ground?) Sort of fixed itself.  Essentially just cycled power, though incrementally.|
|T|M|F|1493567028620|1494279285416|oncley|check connection of Tsoil probe at tnw05. No problems with connectors. Assume we have a bad probe or PIC not sending Vref signal. (replaced 2017-05-05)|
|T|M|F|1494352658700|1494433229130|oncley|tnw08: install power cable and power up/test|

ISFS Perdigao Task Report