Station is up and sensors reporting, EXCEPT CSAT3A at 20m.  Since it doesn't show a sonic head connected (using enter, D shows "SN0000" for the sonic), the fix should be just plugging in the head to the EC100.

More information about rne06:

Ted and Gary staged the sensors yesterday, all except for the Licor since we were missing the boom clamp.  Here are the serial numbers:

• Licor 1166
• Nr01 2537
• EC100 1821
• Csat3 1120
• Csat3a 2033

Lessons learned: We should have demonstrated how to connect the Licor and sonics on the ground, before the climbers went up.

After the install Gary checked the data:

• Licor working.
• GPS working.
• CSAT3 at 10m wind and temperature measurements looked good.
• 20m CSAT3A winds are nan, as noted above by Steve.
• NR01 reporting.
• Attached soil mote, I think all the measurements look ok.  The mote voltage is only 9-10V.
• The Ubiquiti nanobeam ethernet cable was too short, so Ted decided to move it down 2m from the top to reach the DSM at the usual height.

• The soil bulgin cable barely reaches, so it might be a good idea to string some cord between tower and tree next to mote and hang the cable from that.