Dan tells me that the s10 and s15 Victrons are hooked up and talking over their Bluetooth app.  I tried logging into s10 and get the message that the port "isn't open yet".  In a rash attempt to try to reset this (USB) port, I rebooted.  s10 is sending data again (still not from the Victron), though I've now also lost the ability to log in via the tunnel.  I note that the tunnel just didn't respond for about 5min, then finally started giving "connection refused" messages...

daq@s10:~/isfs/projects/SWEX/ISFS/config $ rs /dev/ttyPWRMONV

connecting to inet:s10:30002

connected to inet:s10:30002

sent:"/dev/ttyPWRMONV

"

line="OK"

parameters: 19200 none 8 1 "\n" 1 0 prompted=false

:Take it easy Stumpy! s10:/dev/ttyPWRMONV is not open (yet)\n

If it helps, I also did "lsusb":

daq@s10:~/isfs/projects/SWEX/ISFS/config $ lsusb

Bus 001 Device 008: ID 0781:5575 SanDisk Corp. 

Bus 001 Device 007: ID 0403:6015 Future Technology Devices International, Ltd Bridge(I2C/SPI/UART/FIFO)

Bus 001 Device 012: ID 1410:9030 Novatel Wireless 

Bus 001 Device 006: ID 0bda:5411 Realtek Semiconductor Corp. 

Bus 001 Device 005: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC

Bus 001 Device 004: ID 0403:6011 Future Technology Devices International, Ltd FT4232H Quad HS USB-UART/FIFO IC

Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter

Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. 

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub