Dan, Tony, Chris took the day off.  Steve and Gary visited DCS for a couple of hours in the morning.  Then we were in meetings...

DCS:

• Attached rad logger cable, but didn't work.  2 days earlier, I saw -5V on the logger's pin2 of the D9, but I didn't see this at the DSM end on the Bulgin (on any pin).  I <could> see -5V on pin3 of the D9 from the DSM.  Has to be something simple.  I also am not sure of the baud rate or the data rate (1/min?), but using minicom I didn't even see garbage after 2min.
• Installed batteries and power board in the job box.
• Powered up all of the DSMs (though not together due to power cabling).  The only issue was the fan not working on TRH.1m.
• Gary reconfigured the modems and we set "rfkill unblock wifi" on each DSM, so both cell and wifi connections should work.
• Found that the V2.7 mote connected to the Rsw's had its power switch off, so turned it on.  Also saw that the data output was in "ascii-ish" with mp=1.  Changed to mp=0 (the standard Wisard format)