Started chilly, then nice, then windy and cold, then a nice evening.

Dan has started PTO – Thanks for everything!!

PRS:

• lowered TT
• reseated connector to Rlw.xx.7m and got it going
• dressed cables up TT and closed off spiral cable guides
• raised TT (finally!), up about 10AM
• removed Sebastian's darkhorse

CC:

• unplugged and plugged in USB serial dongle, then restarted NIDAS.  Got HRXL going
• did a crude compass boom angle shoot of 237deg magnetic (248 true) looking into the boom.
• However, something that we did stopped cc from being on the net.  Probably have to reboot it.  Might wait until we go out to install a thermocouple.

DCS:

• replaced TRH housings at 1m, 3m (they didn't have fans!). Now both are working
• reconfigured mote IDs on Rsw.xx.2m and now see data
• lowered TT
• replaced TRH housing at 17m that was working (so data would have been fine, just had been reading too high Rfan).  Replacement is normal.
• installed thermocouples at all 3 levels
• closed off spiral cable guides
• raised TT
• connected TC_LOGGER to dcsr, port 6 and changed config (but didn't get data until I also changed the baudrate to 115200 – different than the RAD_LOGGER!)
• installed thermocouple connectors at 1, 2, 3m
• installed an actual thermocouple at 3m
• discovered that AC power was off (when Utah started plugging lots of things in).  It had been down since about noon 2 days ago.  Turned out to be a loose plug at the power panel.  Have tried to connect, but don't get a solid "click" when trying to turn.  We'll have to keep an eye on this.

SH:

• asked Chris to FedEx an early CSAT3A to us to replace the one that has been removed.  It will need a special mount.

UP:

• this snow depth sensor appears to have fixed itself, with no action by us.

TODOs:

• replace a sonic at SH (tomorrow AM)
• get cc back on the net
• connect TC logger at prs
• sprinkle thermocouples on satellite sites