Normally do not use data at wind directions of +/- 45 degrees from 180 (in sonic coordinates). For RIM, I used +/- 120 degrees.
Can recalculate these at end of project.
sonic |
lean (deg) |
leanaz (deg) |
w offset (cm/s) |
|---|---|---|---|
3m.near |
0.6 |
1.5 |
-1 |
10m.near |
1.0 |
11.5 |
-2 |
15m.near |
0.6 |
47.9 |
0 |
20m.near |
0.7 |
32.3 |
-1 |
25m.near |
1.1 |
77.9 |
-1 |
30m.near |
0.7 |
32.3 |
-1 |
35m.near |
0.9 |
114.5 |
-2 |
40m.near |
0.8 |
89.3 |
0 |
45m.near |
1.2 |
47.8 |
-1 |
50m.near |
1.0 |
37.4 |
0 |
5m.rim |
1.5 |
-140.5 |
-7 |
10m.rim |
3.0 |
153.3 |
-14 |
15m.rim |
2.8 |
-163.9 |
-21 |
20m.rim |
2.9 |
-168 |
-24 |
25m.rim |
3.3 |
178.6 |
-29 |
30m.rim |
3.5 |
-179.1 |
-29 |
35m.rim |
3.0 |
-177.5 |
-32 |
40m.rim |
3.6 |
-156.5 |
-31 |
3m.far |
1.0 |
-31.6 |
-1 |
3m.flr |
0.5 |
167.6 |
-3 |
3m.ssw2 |
10.2 |
-59.1 |
2 |
3m.ssw4 |
30.6 |
-39.4 |
-4 |