Initial AHATS data system configuration. Note: this was changed later, see changed serial cards at upwind, downwind2
name |
viper# |
box |
IP |
tower |
net link |
serial #0 |
serial #1 |
profile |
3 |
6 |
192.168.14.103 |
profile |
eantg |
8P W274095 |
8M 240017 |
downwind1 |
6 |
14 |
192.168.14.106 |
d4 |
hub in profile |
8M W249918 |
8M 250043 |
downwind2 |
1 |
13 |
192.168.14.101 |
d10 |
eanth |
8P W274177 |
8M W249924 |
upwind |
2 |
1 |
192.168.14.102 |
u7 |
hub in downwind2 |
8P W274198 |
8M W240025 |
pressure1 |
10 |
small |
192.168.14.110 |
d4 |
hub in profile |
|
|
pressure2 |
11 |
large |
192.168.14.111 |
d10 |
hub in downwind2 |
|
|
To prevent the AP24 from serving addresses to the vipers, I entered these commands:
ip dhcp-server lease add mac-address 00:80:66:10:43:96 block-access=yes add mac-address 00:80:66:10:43:8C block-access=yes add mac-address 00:80:66:10:43:92 block-access=yes add mac-address 00:80:66:10:43:8D block-access=yes add mac-address 00:80:66:10:43:C5 block-access=yes add mac-address 00:80:66:10:42:A6 block-access=yes add mac-address 00:80:66:10:43:96 block-access=yes