...
| Section |
|---|
| Column |
|---|
M21 ht (m) | serial port | sensor | status |
|---|
0.5 | s1 | CSAT | ok | 0.5 | s2 | TRH | NG, fan running, high current (>1A), no data | | s3 | gps | ok | 1 | s5 | CSAT | ok | 1 | s6 | Licor | NG, blows fuses | 1 | s7 | PTB220 p | ok
| 1.5 | s8 | TRH | NG, fan speed unsteady, no data | 2 | s9 | CSAT | NG, blows fuses | 2 | s10 | Licor | NG. No data | 2 | s11 | TRH | NG, 1.2A, no data | 3 | s12 | CSAT | ok | 3 | s13 | TRH | NG, 1.3A | 4 | s14 | CSAT | ok | 4 | s15 | TRH | NG. 0.1 A but no data, no fan | 5 | s16 | CSAT | NG 0.3 A, no data | 5 | " | kh2o/serializer | ? | 5 | s17 | Paroscientific p | NG. 0.05 A, no data, tried *0100P4/r/n init | | s18 | Picarro PC | NG |
|
| Column |
|---|
M22 ht (m) | Serial Port | Sensor | Status |
|---|
6 | S1 | TRH
| NG 0.1 A, no fan, no data | 6 | S2 | Handar | ok | | S3 | gps | ok | 8 | S5 | TRH (replaced SHT) | bad data (-40C), replacement OK | 8 | S6 | Handar | ok | 10 | S7 | CSAT | ok | 10 | " | KH2O/serializer | NG. Raw data: 0xffff | 15 | S8 | TRH (replaced SHT) | bad data (-40C), replacement OK | 15 | S9 | Handar | ok | 20 | S10 | CSAT | ok | 20 | S11 | PTB 220 p | ok |
|
|
Two sensors at C also ceased data_stats isfs_20120927_200000.dat.bz2 indicates that sensors at other sites quit reporting at 21:03:05 UTC, including two sensors at C: the 1.5m TRH and the barometer. The TRH resumed reporting , all on its own I believe, on Sep 28 04:29 UTC.
Site C20
Serial Port | Sensor | Status |
|---|
s7 | 1.5m TRH | quit, but resumed on Sep 28 04:29 UTC |
s10 | PTB | NG no data |
Station 12 also quit reporting at 21:03:05, but is now working after replacing the charging controller. However data from the TRHs at 12 via the bluetooth mote is not coming in.
Coincidentally a 0.5m TRH at 6 also stopped reporting right at that time, as seen with
data_stats isfs_20120927_200000.dat.bz2. The following sensors at the A stations are still not reporting, as of Sep 29:
...