...
a17: The comms/dsm has been intermittent this morningday. Best guess is that it's the comm/blue-tooth. Checked on this in afternoon and indeed it's been the source. Possibly the cable: connections ok but I dressed the cable a bit to reduce 'wiggling in the wind.' Need to watch this.....
a2: 1m CSAT is having a diag bit set (4, bit 2) but the values uvwtc all look good. The The CSAT manual says that bit 2 indicates "poor signal lock", which may be caused by an obstruction in one of the paths. That was not the case. I tried shielding it from the strong wind and make a 'sweat-shirt' zero chamber which helped. Probably signal strength/sensativity settings, need to swap.
TRH's: see other entry about speeding up the data rate on the serial versions, stns 1,2,3,5,6,c20,m21,m22
...
a8: TRH's intermittent this morning. This appears to be the 'mote \r\n' software bug. Need to fix and reprogram today.....
To Do:
- Swap CSAT at A2
- Swap A17 BTradio/cable.
- Fix mote \r\n bug and reprogram A8's mote