Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 4.0

...

Because of potential problems with the TRH's dropping out with corrosion/moisture, I'm taking the wagon-wheels apart, cleaning and coating the back side of the connectors with nail polish and greasing around the 'pin-well'.   This means intermittent outages.   Results, summary below.

16-Oct-12 update: all except 'c' 2.5m and 'm' 15m have been done.   In addition all those done on 15th need to be finished with grease on top of the nail polish.   Will update as things proceed, this is going to take awhile......

ToDo: Clean/Coat Upper at 'c','m',1-8,      Add 3rd screw 2m on ap14,    Grease fill all connector wells.

Stn

Date

Down (MST)

Up (MST)

Comments

1

 

 

 

 

2

 

 

 

 

3

 

 

 

 

4

 

 

 

 

5

 

 

 

 

6

 

 

 

 

7

 

 

 

 

16-Oct

15:15

15:55

Some oxidation on both .5m,2m.  Cleaned/Coated/Greased

2

16-Oct

16:00

16:30

Some oxidation on both .5m,2m.  Cleaned/Coated/Greased

3

16-Oct

14:15

15:05

Some oxidation on both .5m,2m.  Cleaned/Coated/Greased

4

16-Oct

16:35

17:05

Some oxidation on both .5m,2m.  Cleaned/Coated/Greased

5

16-Oct

17:30

17:55

Some oxidation on both .5m,2m.  Brushed/Coated/Greased
(tip on cleaner broke off, could only brush oxide off)

6

16-Oct

17:10

17:25

Some oxidation on 2m.  Brushed/Coated/Greased

7

16-Oct

12:35

13:00

No oxidation evident on .5m, some on 2m.  Cleaned/Coated/Greased

8

16-Oct

11:55

12:30

No oxidation evident on .5m,2m.  The 2m trh was loose in the connector but apparently still ok.
Cleaned/Coated/Greased.

8

 

 

 

 

9

15-Oct

17:35

18:00

Cleaned/Coated .5m,2m

10
15Oct

15-Oct

17:00

17:30

Cleaned/Coated .5m,2m

11
15Oct

15-Oct

16:10

16:35

Cleaned/Coated .5m,2m

12
15Oct

15-Oct

15:50

16:05

Coated, no oxidation on these 2

13
15Oct

15-Oct

15:25

15:45

Cleaned/Coated .5m,2m

14
15Oct

15-Oct

14:50

15:20

Cleaned/Coated .5m,2m

15
15Oct

15-Oct

11:55

12:27

Cleaned/Coated .5m,2m

16
15Oct

15-Oct

12:30

12:55

2m had no obvious corrosion
.5m did and I couldn't get it all off in between the pins
NOTE: .5m remained down....

17
14Oct

14-Oct

 

 

See outage last night.  Swapped in new shields that had been Cleaned/Coated

18
15Oct

15-Oct

11:20

11:50

Cleaned/Coated .5m,2m

19
15Oct

15-Oct

10:40

11:15

No obvious oxidation: coated only

'C'

15-Oct 15Oct

10:00

10:35

Cleaned/Coated .5m,1m,1.5m...Not 2.5m upper

'M'

 

 

 


16-Oct

9:00

11:45

Off and on outages through period.   No oxidation evident on any of the trh's!
All Brushed/Coated/Greased except 15m because i had trouble getting connector out of boom and didn't want to risk damage