You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Jacquie will have us create a data monitoring page, but for set-up/burn-in, I'm going to keep track of issues here:

d:

  • Today, swapped ports 5&6 to get the soil/snow motes right
  • Today, also moved TS036 (10cm) from the "snow" to the "soil" mote
  • Found that the Tsoil that I read as TS17 is reporting as TS47.  Have just updated the config on "d" and Gary propagated into git.
  • But, as of yesterday morning, all Tsoils stopped getting to qctables, even though sensors are running on DSM. (Other soils are fine.)
  • Apogee now mounted and reporting
  • no Tsnows yet

ue:

  • had to pio cycle 3 to get the nano to report
  • Gary saw error flags on the 3m EC100.  All looks okay now, though the co2 levels are quite low – maybe nidas limit checking was setting flags
  • Apogee now mounted and reporting
  • no Tsnows yet

uw:

  • no NR01 (wetness) yet
  • Apogee now mounted and reporting
  • no Tsnows yet

c:

  • cu, ct are mounted, power and network cables connected, but not running
  • cb, cl, cm mounted and running
  • TRHs from 1–10m mounted and running
  • snow nanos connected (but no inlets set up)
  • flowcapts mounted, but not yet connected (need code to handle 2 such USB devices in one DSM)
  • 4 pillows are now in place, two responding and two not yet connected
  • Apogee now mounted and reporting
  • no Tsnows yet
  • need to figure out if sonic or EC150 should be mounted at 1.5m

Other:

  • where to add webcam?
  • add NR01 & wetness to qctables
  • add second Victron to cl


  • No labels