You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Dan noticed that, as predicted a few logbook entries ago, T.300m was bad again.  I manually restarted it at about 9 this morning.  Since then, Gordon has written a script that checks tower TRH data every 10s and restarts the sensor if needed.

I also note the METCRAX-II logbook comment: "TRH.40m.rim restarted" where we found that the (bad) data are correctable.  My (manual) code to implement this for METCRAXII is at $ISFF/projects/METCRAXII/ISFF/R/fixSHT.qq.  It isn't clear that it is worth the effort to implement this fix for the 15 hours of data that are missing during this educational deployment...

If we decide to fix these data, we will need the following coefficients:

 Sensor ID3   I2C ADD: 12   data rate: 1 (secs)  fan(0) max current: 80 (ma)\n
2015 04 09 15:01:26.7912 0.08542      44 \rresolution: 12 bits      1 sec MOTE: off\r\n
2015 04 09 15:01:26.8472 0.05602      28 calibration coefficients:\r\n
2015 04 09 15:01:26.8755 0.02831      21 Ta0 = -4.112729E+1\r\n
2015 04 09 15:01:26.9047 0.02921      21 Ta1 =  4.153065E-2\r\n
2015 04 09 15:01:26.9348 0.03005      21 Ta2 = -5.198994E-7\r\n
2015 04 09 15:01:26.9555 0.02074      21 Ha0 = -7.871138E+0\r\n
2015 04 09 15:01:26.9848 0.02932      21 Ha1 =  6.237115E-1\r\n
2015 04 09 15:01:27.0148 0.02994      21 Ha2 = -5.446227E-4\r\n
2015 04 09 15:01:27.0348 0.01999      21 Ha3 =  8.683383E-2\r\n
2015 04 09 15:01:27.0648 0.03001      21 Ha4 =  7.886339E-4\r\n
2015 04 09 15:01:27.0947 0.02994      21 Fa0 =  3.222650E-1\r\n



 

  • No labels