PP02
Tech: Ivana
Other Aircrew: Kyle, Aaron S., Brent, Toro, Bo
1502 Takeoff
1840 Land
-SATCOM spare RF switch installed prior to startup
-Propane CV reading negative PSI in Aeros (PCV1HP = -8.8)
-DSM 322 and CDP/2DC on Left Wing Pod did not work at startup. Reset LW DSM & LWP 60Hz circuit breakers, then DSM worked and probes showed housekeeping data. Network cable should be secured during maintenance day
-SATCOM inop at startup, connected while on ground, then inop again before takeoff
-1510 Satcom breakers and switch reset; still inop (N heading toward Cheyenne)
-1520 SATCOM operational again after right turn near Cheyenne (NE heading)
-R-1 Outboard laptop not connecting to aircraft network; Kyle turned on wired connection in settings and was able to connect on Chat afterwards; laptop also not connecting to acserver, so unable to connect to Aeros
-Underfloor temp in Aeros (UFT) reading 87 degrees F (FE station reading 98 degrees F max) - units in Aeros show "deg_C", should be changed to "deg_F"
-SATCOM intermittently cut out and re-connected during touch-and-go's
-1705 SATCOM still inop; tried "ping 8.8.8.8", got error message "From 192.168.84.1 icmp_seq=211 Destination Net Unreachable"
-1719 SATCOM inop for 15min; asked FE to reset switch
-1725 SATCOM operational again
1 Comment
Christopher Webster
Jul 08, 2025SATCOM drop outs (measured looking at the UDP groundfeed database):