RW Pod DSM failed to initialize, came up after cycling the breaker VCSEL laser isn't powering on, the unit powers on but is inop SDI blower had low flow, power cycled and its gtg After several cycles on ground, VCSEL came up after the first power cycle in the air, a few minutes after takeoff CN Counter is still under counting after cleaning by RSIG
Satcom dropped out ~45 minutes, and would come back ~10 minutes after requesting the FE to reset the system
1 Comment
Aaron Gunlock
Aug 27, 2025RF20
Tech: Gunlock
8/27/2025
Power on: started 0545
RW Pod DSM failed to initialize, came up after cycling the breaker
VCSEL laser isn't powering on, the unit powers on but is inop
SDI blower had low flow, power cycled and its gtg
After several cycles on ground, VCSEL came up after the first power cycle in the air, a few minutes after takeoff
CN Counter is still under counting after cleaning by RSIG
Satcom dropped out ~45 minutes, and would come back ~10 minutes after requesting the FE to reset the system
Engine Start: 0825
Taxi: 0831
Takeoff: 0842
Landing: 1403