Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • unplugged and plugged in USB serial dongle, then restarted NIDAS.  Got HRXL going
  • did a crude compass boom angle shoot of 237deg magnetic (248 true) looking into the boom.
  • However, something that we did stopped cc from being on the net.  Probably have to reboot it.  Might wait until we go out to install a thermocouple.

DCS:

  • replaced TRH housings at 1m, 3m (they didn't have fans!). Now both are working
  • reconfigured mote IDs on Rsw.xx.2m and now see data
  • lowered TT
  • replaced TRH housing at 17m that was working (so data would have been fine, just had been reading too high Rfan).  Replacement is normal.
  • installed thermocouples at all 3 levels
  • closed off spiral cable guides
  • raised TT
  • connected TC_LOGGER to dcsr, port 6 and changed config (but dondidn't see data yetget data until I also changed the baudrate to 115200 – different than the RAD_LOGGER!)
  • installed thermocouple connectors at 1, 2, 3m
  • installed an actual thermocouple at 3m
  • discovered that AC power was off (when Utah started plugging lots of things in).  It had been down since about noon 2 days ago.  Turned out to be a loose plug at the power panel.  Have tried to connect, but don't get a solid "click" when trying to turn.  We'll have to keep an eye on this.

...

  • asked Chris to FedEx an early CSAT3A to us to replace the one that has been removed.  It will need a special mount.

UP:

  • this snow depth sensor appears to have fixed itself, with no action by us.


TODOs:

  • replace a sonic at SH (tomorrow AM)
  • get cc back on the net
  • connect TC logger at prs
  • sprinkle thermocouples on satellite sites