Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • unplugged and plugged in USB serial dongle, then restarted NIDAS.  Got HRXL going
  • did a crude compass boom angle shoot of 237deg magnetic looking into the boom.

DCS:

  • replaced TRH housings at 1m, 3m (they didn't have fans!). Now both are working
  • reconfigured mote IDs on Rsw.xx.2m and now see data
  • lowered TT
  • replaced TRH housing at 17m that was working (so data would have been fine, just had been reading too high Rfan).  Replacement is normal.
  • installed thermocouples at all 3 levels
  • closed off spiral cable guides
  • raised TT
  • connected TC_LOGGER to dcsr, port 6 and changed config (but don't see data yet)
  • installed thermocouple connectors at 1, 2, 3m
  • installed an actual thermocouple at 3m
  • discovered that AC power was off (when Utah started plugging lots of things in).  Turned out to be a loose plug at the power panel.  Have tried to connect, but don't get a solid "click" when trying to turn.  We'll have to keep an eye on this.

...