Started chilly, then nice, then windy and cold, then a nice evening.
Dan has started PTO – Thanks for everything!!
PRS:
- lowered TT
- reseated connector to Rlw.xx.7m and got it going
- dressed cables up TT and closed off spiral cable guides
- raised TT (finally!), up about 10AM
- removed Sebastian's darkhorse
CC:
- unplugged and plugged in USB serial dongle, then restarted NIDAS. Got HRXL going
- did a crude compass boom angle shoot of 237deg magnetic (248 true) looking into the boom.
- However, something that we did stopped cc from being on the net. Probably have to reboot it. Might wait until we go out to install a thermocouple.
DCS:
- replaced TRH housings at 1m, 3m (they didn't have fans!). Now both are working
- reconfigured mote IDs on Rsw.xx.2m and now see data
- lowered TT
- replaced TRH housing at 17m that was working (so data would have been fine, just had been reading too high Rfan). Replacement is normal.
- installed thermocouples at all 3 levels
- closed off spiral cable guides
- raised TT
- connected TC_LOGGER to dcsr, port 6 and changed config (but didn't get data until I also changed the baudrate to 115200 – different than the RAD_LOGGER!)
- installed thermocouple connectors at 1, 2, 3m
- installed an actual thermocouple at 3m
- discovered that AC power was off (when Utah started plugging lots of things in). It had been down since about noon 2 days ago. Turned out to be a loose plug at the power panel. Have tried to connect, but don't get a solid "click" when trying to turn. We'll have to keep an eye on this.
SH:
- asked Chris to FedEx an early CSAT3A to us to replace the one that has been removed. It will need a special mount.
UP:
- this snow depth sensor appears to have fixed itself, with no action by us.
TODOs:
- replace a sonic at SH (tomorrow AM)
- get cc back on the net
- debug