Page tree
Skip to end of metadata
Go to start of metadata

As sensors and DSMs need attention during the project, or other tasks are needed, they can be added to the "dynamic task list" below.  Enter the task description in the text box, then click Add.  Click the arrow next to a task to see and edit more details about it.

Tasks can also be inserted anywhere in the wiki and assigned to someone.  When editing a blog or wiki page, click the Insert menu and select Task List.  Then after typing the task description next to the checkbox, add the \@ symbol and select a user, including yourself.  Then that task will show up in that person's task list.  The task report below lists all incomplete tasks collected from the ISFS Perdigao wiki space, whether inserted in the dynamic task list on this page or any other pages in the space.  So this is the place to manage tasks for the whole project, including those which have not already been assigned to someone.

You can assign tasks to yourself or other accounts, and you can give tasks higher or lower priority.  You can view the tasks assigned just to you by clicking your profile account in the upper right and selecting Tasks.  That page lists all your tasks across all wikis, not just the Perdigao wiki.

If tasks become complicated or start to involve important technical documentation, consider creating a wiki page or JIRA issue just for that problem.

85%

To Do List

  1. handler

    tse04: 60m TRH out, pio doesn't work

    Priority MEDIUM
    granger
    May 12, 2017
  2. handler

    tnw09: Qsoil reads negative, but is okay? suggest reseating sensor cable (see https://wiki.ucar.edu/display/perdigao/2017/04/12/tnw09+Qsoil)

    Priority MEDIUM
    oncley
    Mar 14, 2017
  3. handler

    rne03: Main DC power cable is badly corroded at DSM (though still working apparently). Need to re-terminate this connector.

    Priority MEDIUM
    oncley
    May 11, 2017
  4. handler

    v06/v07: fix li7500s needed to be power cycled

    Priority MEDIUM
    oncley
    May 09, 2017
  5. handler

    tse05: reorient solar panel? (now pointing east) added second solar panel

    Priority MEDIUM
    granger
    May 17, 2017
  6. handler

    shoot booms on towers built since mid April. (Waiting for Robert to bring their Multistation from DTU.)

    Priority MEDIUM
    oncley
    May 08, 2017
  7. handler

    take soil samples everywhere when wet; then when dry

    Priority MEDIUM
    oncley
    May 08, 2017
  8. handler

    clean all radiometers, though not urgent since we're having ongoing rain

    Priority MEDIUM
    oncley
    May 08, 2017
  9. handler

    rsw01: install ARL LiCor w/20m METEK when it arrives

    Priority MEDIUM
    oncley
    May 18, 2017
  10. handler

    rsw07: install ARL LiCor w/20m CSAT3A when it arrives

    Priority MEDIUM
    oncley
    May 18, 2017
  11. handler

    rne04: check tower tension; install the 1 sonic both done, then sonic blew fuses, someone fixed it and moved it to port 3, working now

    Priority MEDIUM
    granger
    May 09, 2017
  12. handler

    rne07: 20m CSAT3A has been bad, working now seems to be working for a while now, forgettaboutit

    Priority MEDIUM
    granger
    May 15, 2017
  13. handler

    tse06: 2m TRH on port 0 not working (https://wiki.ucar.edu/display/perdigao/2017/05/21/Sensor+issues+21+May+AM), replace 1A fuse fuse replaced by INEGI, TRH working

    Priority MEDIUM
    granger
    May 26, 2017
  14. handler

    tse05: install reduced tower, since Samortecnica won't (need to design!)

    Priority MEDIUM
    oncley
    May 09, 2017
  15. handler

    tse07: 10m CSAT has been bad, working now; TP01 out (mote fuse had cold solder joint)

    Priority MEDIUM
    oncley
    May 17, 2017
  16. handler

    tse10: install ARL LiCor w/20m METEK when it arrives [DELETED: ONLY 2 AVAILABLE FROM ARL]

    Priority MEDIUM
    oncley
    May 18, 2017
  17. handler

    tnw07: 60m TRH out, no response to pio

    Priority MEDIUM
    oncley
    May 12, 2017
  18. handler

    rsw06: DSM not pinging, but wifi is: up since 2017-04-02

    Priority MEDIUM
    granger
    Mar 14, 2017
  19. handler

    Change tnw05t IP address to 192.168.1.206 done

    Priority MEDIUM
    granger
    Apr 09, 2017
  20. handler

    Add /etc/hosts to all DSMs installs when each dsm is updated

    Priority MEDIUM
    granger
    Feb 05, 2017
  21. handler

    rsw03: 40m TRH dead, pio doesn't work

    Priority MEDIUM
    oncley
    May 12, 2017
  22. handler

    rsw07: not pinging at all up since 2017-03-30

    Priority MEDIUM
    granger
    Mar 14, 2017
  23. handler

    v07: add anti-rotation plate to 2m sonic done; Replace 12V power supply with 14V done; Dead now, though has worked v07t and v07b up since 2017-03-23

    Priority MEDIUM
    granger
    Feb 05, 2017
  24. handler

    rne01: DSM sometimes isn't pinging, but wifi is – reseat RJ45 cable? (did connect enough to scrub USB) up since 2017-03-30

    Priority MEDIUM
    granger
    Feb 17, 2017
  25. handler

    Get remaining serial numbers (tnw07, rsw03, rne03)

    Priority MEDIUM
    granger
    Jan 24, 2017
  26. handler

    tse02: install solar power system; ground EC100s done, site installed on 20170406

    Priority MEDIUM
    granger
    Jan 31, 2017
  27. handler

    rne07: Check that NR01 and 20m EC150 ports are correct (I've tried swapping, but both are mostly dead) Dan swapped cables back to match config, both work now

    Priority MEDIUM
    granger
    Jan 31, 2017
  28. handler

    v07: LICOR on v07t not reporting on port 3, even after 3A fuse replaced (see https://wiki.ucar.edu/display/perdigao/2017/04/11/v07+licor for a suggestion) fixed 20170412 by switching jumpers to RS232

    Priority MEDIUM
    granger
    Apr 10, 2017
  29. handler

    tnw11: Replace 12V power supply with 14V done 2017-04-12, but tnw11.10m sonic still bad, see new todo

    Priority MEDIUM
    granger
    Jan 31, 2017
  30. handler

    rsw02: Replace 12V power supply with 14V done 2017-04-14

    Priority MEDIUM
    granger
    Jan 24, 2017
  31. handler

    rsw03: 20m Ifan=329!!, leaving off until repaired swapped 2017-04-14

    Priority MEDIUM
    granger
    Mar 10, 2017
  32. handler

    v04: move soil sensors?/longer sensor cable; installed longer cable 4/14

    Priority MEDIUM
    kknudson
    Jan 31, 2017
  33. handler

    rsw04: 20m licor: check that RTS/DTS is connected (appropriately); Rsw.in has Rsw.out moteID (replaced 2017-05-08); no wetness – wisard board missing?

    Priority MEDIUM
    kknudson
    Mar 10, 2017
  34. handler

    tnw02: Mount RMY; switch usb1&2 cables.

    Priority MEDIUM
    oncley
    May 13, 2017
  35. handler

    tnw02: check tower tension; install sensors; rewire power for 12V (now 24V) NOTE EACH BATTERY'S TERMINALS! (remember screws)

    Priority MEDIUM
    oncley
    May 09, 2017
  36. handler

    tnw04: check tower tension; install sensors; rewire power for 12V (now 24V) NOTE EACH BATTERY'S TERMINALS!

    Priority MEDIUM
    oncley
    May 09, 2017
  37. handler

    tnw07: 10m TRH Ifan=0

    Priority MEDIUM
    kknudson
    Feb 17, 2017
  38. handler

    tnw07b: switch 12m RMY to a port with a different UART

    Priority MEDIUM
    kknudson
    Apr 18, 2017
  39. handler

    tnw05: Install 2m & 10 m trh, switch 12m RMY to a port with a different UART, change config so 2m and 12m sonics are swapped

    Priority MEDIUM
    kknudson
    Apr 18, 2017
  40. handler

    tnw11.10m sonic still reporting all bad values (error flag 12) even after voltage bumped up to 13.7V

    Priority MEDIUM
    kknudson
    Apr 14, 2017
  41. handler

    tse06: 2m, 10m, 20m, 60m TRH Ifan=0

    Priority MEDIUM
    kknudson
    Feb 17, 2017
  42. handler

    tse07: 20m IRGA reporting bad pressure. Either config issue or bad connector. 10m CSAT upside down?? (junction box should be on top of boom)

    Priority MEDIUM
    dbuonome
    Mar 10, 2017
  43. handler

    tse09: 20m TRH ifan=0

    Priority MEDIUM
    dbuonome
    Mar 27, 2017
  44. handler

    tse11: 10m, 20m, 40m TRH Ifan=0; mote not reporting

    Priority MEDIUM
    kknudson
    Feb 17, 2017
  45. handler

    tse13: 70m: reattach mote cable, then power up with pio; 2m, Ifan=0; 100m TRH Ifan=0

    Priority MEDIUM
    kknudson
    Jan 30, 2017
  46. handler

    tse14: WON'T BE ERECTED waiting for tower to be erected; prepped and ready

    Priority MEDIUM
    oncley
    May 09, 2017
  47. handler

    tse15: waiting for tower to be erected; prepped and ready

    Priority MEDIUM
    oncley
    May 09, 2017
  48. handler

    rsw02: Offline though nanobeam is working, see Visit RSW02 and RSW05 and ISFS-149 rsw02 has been up 8 days as of 20170424

    Priority MEDIUM
    granger
    Apr 09, 2017
  49. handler

    rsw02: 20m sonic dead, pio doesn't work (port 2 died in lightning, moved to port 3, also switched sonic anyway)

    Priority MEDIUM
    oncley
    May 12, 2017
  50. handler

    rsw03: 10m TRH not reporting, 40m TRH requires installation

    Priority MEDIUM
    dbuonome
    Apr 14, 2017
  51. handler

    rsw05: METEK on ttyS5 not reporting working now with port switched to 422 mode

    Priority MEDIUM
    granger
    Feb 17, 2017
  52. handler

    rsw06: Replace TRH.20m. Will not come back to life with PIO.

    Priority MEDIUM
    oncley
    May 03, 2017
  53. handler

    rne01: kzrad on port 6 and csat3a irga on port 2 not reporting

    Priority MEDIUM
    dbuonome
    Apr 10, 2017
  54. handler

    rne02: Replace12V power supply with 14V.

    Priority MEDIUM
    kknudson
    Jan 24, 2017
  55. handler

    rne03: install ARL LiCor w/10m CSAT3A when it arrives [DELETED: ONLY 2 AVAILABLE FROM ARL]

    Priority MEDIUM
    oncley
    May 18, 2017
  56. handler

    v07: 20m CSAT3A sonic on 4 now reporting mostly zeros with no message terminators (working at 00Z 12 Apr)

    Priority MEDIUM
    dbuonome
    Apr 10, 2017
  57. handler

    v06: 20m sonic reporting intermittent nans

    Priority MEDIUM
    dbuonome
    Apr 10, 2017
  58. handler

    rsw02: 20m RMYoung reporting bad diagnostic flags

    Priority MEDIUM
    oncley
    Apr 24, 2017
  59. handler

    rne01: Rad Mote keeps resetting, replace mote

    Priority MEDIUM
    oncley
    Apr 30, 2017
  60. handler

    v01: change EC150 from 10 to 20sps

    Priority MEDIUM
    semmer
    May 01, 2017
  61. handler

    v07t won't power on (also needs ground?) Sort of fixed itself. Essentially just cycled power, though incrementally.

    Priority MEDIUM
    oncley
    May 12, 2017
  62. handler

    check connection of Tsoil probe at tnw05. No problems with connectors. Assume we have a bad probe or PIC not sending Vref signal. (replaced 2017-05-05)

    Priority MEDIUM
    oncley
    Apr 30, 2017
  63. handler

    tnw08: install power cable and power up/test

    Priority MEDIUM
    oncley
    May 09, 2017

ISFS Perdigao Task Report

DescriptionDue dateAssigneeTask appears on
  • Replace the RMYoung at 20m.
Visit rsw02
  • Soil install
v06 Staged
  • Install and verify instrumentation
v06 Staged
  • The soil bulgin cable barely reaches, so it might be a good idea to string some cord between tower and tree next to mote and hang the cable from that.
rne06
  • Seems like we should report this problem to the person responsible for the ops center and see if they can get an electrician to investigate the problem.  Maybe the main breaker needs to be replaced or upgraded.
Ops Center power instability
  • Check tse13t power mote, and if necessary reconnect, and turn the port power back once connection is confirmed.
tse13t mote turned off
  • EC100 / CSAT 3A ground
v04 Install
  • soil serial to dsm cable
v04 Install
  • run power and test sensors when drop is installed
v04 Install
  •  hose clamp grounding wire to tower
v05 Install

  • No labels