24Jan2011, 10:30-12:30 local, Militzer/Horst
Conditions: mostly calm, upper 30's, clear
Purpose: RMY swap, Soil Samples, Update Mote Code
10:40 Rad Cleaned with Methanol, did not notice desiccant condition
10:35-10:45 Mote Software Updated version 2.4
11:00-11:27 Mast Lowered. 11:08 RMY swapped. Previous sensor seemed ok and did not hear any bearing noise. Swapped anyway. Zeroed and 'boom-directioned to zero' on new sensor: consistent with previous unit. It did seem as though the new sensor's prop was rotating and we didn't noticed a reported velocity. It did start reporting speed with numbers about .4 so we assumed it is ok. 11:11 adn and aup while setting 'ZN' and 'BD'
11:15 Kh2O cleaned. Voltage rose from 1.25 to 1.6 volts.
NOTE: Mast bolts on lowest joint were slightly loose; tightened them up.
ETI gauge was 2/3 full so we expect it to drain soon.
11:30-12:30 Soil Samples taken first at the main and then auxiliary locations. Container 1,0-3 and 1,3-6 were at main. Containers 2,0-3 and 2,3-6 were at aux.
Soil Analysis:
Location | Sample: | Tray | wet wt | dry wt | pan wt | dry wt | water |
---|---|---|---|---|---|---|---|
6 - main | 1: 0-3 | 4-0 | 4.415 | 3.305 | 0.135 | 3.170 | 1.245 |
6 - main | 1: 3-6 | 4-6 | 5.705 | 4.890 | 0.125 | 4.765 | 0.940 |
6 - aux | 2: 0-3 | 2-0 | 3.420 | 2.715 | 0.135 | 2.580 | 0.840 |
6 - aux | 2: 3-6 | 2-6 | 4.775 | 4.094 | 0.130 | 3.964 | 0.811 |